VP-80R2 water swivels serve as a connecting link between the tackle system and the downhole tool, which is connected to the rotating swivel stem. The water swivel provides barring the tool and feeding the flushing liquid through a hose connection into the tubing string to the well face. Swivel installation place is on the elevator tackle system.
TS 3661-001-79560377-2009
Parameter name
VP-80R2-01
VP-80R2-02
VP-80R2-03
VP-80R2-04
VP-80R2-05
Maximum load on the stem, kN (tf)
800 (80)
800 (80)
800 (80)
800 (80)
800 (80)
The maximum pressure of the pumped liquid, PSI (atm)
3086 (210)
3086 (210)
3086 (210)
3086 (210)
3086 (210)
Operating ambient temperature,°К (°С)
from 233(-40) to 343(+70)
from 233(-40) to 343(+70)
from 233(-40) to 343(+70)
from 233(-40) to 343(+70)
from 233(-40) to 343(+70)
Stem feedthrough hole diameter, max.
2"/ 49 mm
2 1/4"/ 58 mm
3"/ 75 mm
3"/ 75 mm
2 1/4"/ 58 mm
Bend feedthrough hole diameter, max.
2"/ 50 mm
2.5"/ 60 mm
3"/ 74 mm
3"/ 74 mm
2"/ 50 mm
Stem coupling dimensions, thread API Spec 5B TBG. D
EUE-27/8″
NUE-3½″
NUE-4″
NUE-4½″
NUE-3½″
Bend coupling dimensions, thread API Spec 5B TBG, d2
NUE-23/8″
NUE-27/8″
NUE-3½″
NUE-3½″
NUE-23/8″
Dimensions, LхL1xD1, max.:
29 1/2"×10"×5 1/5"
30 6/8"×12 5/8"×5 6/8"
30 6/8"×13 6/8"×6 5/8"
32 5/8"×14"×6 5/8"
30 6/8"×12 5/8"×5 6/8"
Weight, max.:
70.5 lbs / 32 kg
81.5 lbs / 37 kg
132.3 lbs / 60 kg
143.3 lbs / 65 kg
86 lbs / 39 kg
Parameter name
VP-80R2-01
VP-80R2-02
Maximum load on the stem, kN (tf)
800 (80)
800 (80)
The maximum pressure of the pumped liquid, PSI (atm)
3086 (210)
3086 (210)
Operating ambient temperature,°К (°С)
from 233(-40) to 343(+70)
from 233(-40) to 343(+70)
Stem feedthrough hole diameter, max.
2"/ 49 mm
2 1/4"/ 58 mm
Bend feedthrough hole diameter, max.
2"/ 50 mm
2.5"/ 60 mm
Stem coupling dimensions, thread API Spec 5B TBG
EUE-27/8″
NUE-3½″
Bend coupling dimensions, thread API Spec 5B TBG
NUE-23/8″
NUE-27/8″
Dimensions, max.:
29 1/2"×10"×5 1/5"
30 6/8"×12 5/8"×5 6/8"
Weight, max.:
70.5 lbs / 32 kg
81.5 lbs / 37 kg
Parameter name
VP-80R2-03
VP-80R2-04
Maximum load on the stem, kN (tf)
800 (80)
800 (80)
The maximum pressure of the pumped liquid, PSI (atm)
3086 (210)
3086 (210)
Operating ambient temperature,°К (°С)
from 233(-40) to 343(+70)
from 233(-40) to 343(+70)
Stem feedthrough hole diameter, max.
3"/ 75 mm
3"/ 75 mm
Bend feedthrough hole diameter, max.
3"/ 74 mm
3"/ 74 mm
Stem coupling dimensions, thread API Spec 5B TBG
NUE-4″
NUE-4½″
Bend coupling dimensions, thread API Spec 5B TBG
NUE-3½″
NUE-3½″
Dimensions, max.:
30 6/8"×13 6/8"×6 5/8"
32 5/8"×14"×6 5/8"
Weight, max.:
132.3 lbs / 60 kg
143.3 lbs / 65 kg
Parameter name
VP-80R2-05
Maximum load on the stem, kN (tf)
800 (80)
The maximum pressure of the pumped liquid, PSI (atm)
3086 (210)
Operating ambient temperature,°К (°С)
from 233(-40) to 343(+70)
Stem feedthrough hole diameter, max.
2 1/4"/ 58 mm
Bend feedthrough hole diameter, max.
2"/ 50 mm
Stem coupling dimensions, thread API Spec 5B TBG
NUE-3½″
Bend coupling dimensions, thread API Spec 5B TBG
NUE-23/8″
Dimensions, max.:
30 6/8"×12 5/8"×5 6/8"
Weight, max.:
86 lbs / 39 kg
The swivel consists of the stem 3 and the housing 4. In the swivel housing there are two ball bearings 12 providing free rotation of the stem. The inner cavity of the housing in the upper and lower parts is sealed against the penetration of the flushing liquid with the pump buckets 7, and from the dust and dirt with the pump buckets 15 and the rings 16 installed in the lid 6. The lid 6 in the housing is locked with dump bolts 13.
When working, the swivel body is under the influence of the washing hose weight, while the weight of the flushing tubes have an effect on the swivel stem.
On the stem upper end a cap 1 is screwed, under which a tube elevator is mounted.
An adapter sub with the required tubing, drill pipe thread or the tool-joint thread can be screw on the swivel stem upon customer's request.
As per consumer's request it is possible to deliver an expanded set of spare parts kit. The specified quantity will be packaged in addition to the standard kit.
Additional options for VP-80R2:
Fig. 2 Additional options for VP-80R2
Option name
Product code
Position
Drawing
Nipple QRC 2″
20
2
Sleeve nut
SB-60-70.03
21
Seal cone
SB-60.01
22
Ring GOST 9833-73/GOST 18829-73*
062-070-46-2-2
23
Nipple QRC 2,5″
20
Sleeve nut
SB-73-70.03
21
Seal cone
SB-73.01
22
Ring GOST 9833-73/GOST 18829-73*
070-078-46-2-2
23
The maximum pressure of the pumped liquid, PSI (atm) – 3674 (250)
Fig. 3 An approximate image of adapter subs for VP-80R2
Option name
n - required size
Drawing
Adapter sub
Collar D × Collar n
3
Collar D × Nipple n
Nipple d2 × Nipple n
Nipple d2 × Collar n
Collar D × Nipple NC 38
* A change in swivel lifting capacity comparing to the selected thread on the sub is possible.
Fig. 3 An approximate image of adapter subs for VP-80R2
