Submersible pumping station for hitching on a tractor SN-160R1-02
Submersible pumping station for hitching on a tractor SN-160R1-02 produced on the basis of a centrifugal pump NC-100R1. The pumping station is lightweight and compact, requires minimal installation space and is easy to maintain.
This pump station is intended for installation in the standard place on the shovel boom instead of the bucket.
Submersible pumping station for hitching on a tractor SN-160R1-02 are intended to pump various liquids:
- abrasive hydraulic fluids (clay and gravel mortars, mixtures of water and sand, ore, etc.);
- flushing liquid used in the course of well drilling;
- household and industrial waste waters;
- spent flushing liquid into cyclone plant to clean it of drilled solids;
- cement mortars.
Submersible pumping station for hitching on a tractor SN-160R1-02 it consists of a suspension, in the lower part of which a centrifugal pump NC-100R1 of size 5"x4" is installed. The centrifugal pump is driven by a hydraulic motor powered by the standard excavator hydraulic system. A skirt with a debris filter is connected to the upstream end of the centrifugal pump to the prevention large particles from entering.
The pump head has a branch for connecting the pressure hose.
The pumping station is attached to the shovel boom with load pins.
|Pumped fluid properties:|
|Hydraulic fluid density, kg/m3||up to 2500|
|Temperature, °C||+5 ... +55|
|Solid particle content||up to 60%|
|Solid particle maximal size, mm||at most 8|
|Nominal height of lift, MPa||0,3|
|Nominal flow, m3/h||160|
|Rated speed, rpm||1400|
|Maximum rotations per minute||2400|
|Motor displacement, cc/rev||56|
|Inlet pressure, MPa:
|Dn suction flange, mm||125|
|Dn pressure flange, mm||100|
|Dimensions LxWxH, max, mm||680х585х1410|
|Station weight, kg||260|