Rosneftegazinstrument

+7 (861) 211-02-98
+7 (918) 088-44-22

Consist of:
MSC-R1 Stage cementing collar

MSC-R1 Stage cementing collar bodyMSC-R1 Stage cementing collar

Consist of:
Pushing stopper

MSC-R1 Stage cementing collar pushing stopperMSC-R1 Stage cementing collar

Consist of:
Falling stopper

MSC-R1 Stage cementing collar falling stopperMSC-R1 Stage cementing collar

Consist of:
Blocking stopper

MSC-R1 Stage cementing collar blocking stopperMSC-R1 Stage cementing collar

MSC-R1 Stage cementing collar

  MSC-R1 Stage cementing collar is intended for well cementing process performing in two stages, both with and without the lag time.

  The scope of using cement stage collar applies for the following cases:

  1. when it is impossible to rise the cementing slurry above the casing string at a requited height in a single action due to hydraulic fracturing and fluid absorption;
  2. when the expected operating pressure in a single action cementing exceeds the cementing outfit technical capabilities;
  3. in cementing gas and gas-condensate wells, and the wells subject to oil and gas showing;
  4. in cementing wells using two cementing slurries different in composition for isolation of layers that differ in temperature or corrosive attack on the support;
  5. when it is provided for the production zone to remain uncemented or to avoid displacing the cementing slurry through the casing shoe;
  6. when a single action cementing is not possible for organizational and technical reasons (if it is impossible to trigger or arrange simultaneously a large quantity of cementing equipment at the drilling site, for instance, in off-shore drilling).

Consist of:
MSC-R1 Stage cementing collar

MSC-R1 Stage cementing collar корпусMSC-R1 Stage cementing collar

Consist of:
Pushing stopper

MSC-R1 Stage cementing collar pushing stopperMSC-R1 Stage cementing collar

Consist of:
Falling stopper

MSC-R1 Stage cementing collar falling stopperMSC-R1 Stage cementing collar

Consist of:
Blocking stopper

MSC-R1 Stage cementing collar blocking stopperMSC-R1 Stage cementing collar

Consist of:
MSC-R1 Stage cementing collar

MSC-R1 Stage cementing collar корпусMSC-R1 Stage cementing collar

Consist of:
Pushing stopper

MSC-R1 Stage cementing collar pushing stopperMSC-R1 Stage cementing collar

Consist of:
Falling stopper

MSC-R1 Stage cementing collar falling stopperMSC-R1 Stage cementing collar

Consist of:
Blocking stopper

MSC-R1 Stage cementing collar blocking stopperMSC-R1 Stage cementing collar
Collar code MSC-140R1
Nominal diameter 5 1/2″| 140 mm
Cargo capacity 750 (585*)
Allowed collar differential pressure, PSI (atm), max:
in cementing 3380 (230)
in operation 8818 (600) | 6319 (430)*
OD collar 6 5/8″| 168 mm
ID collar 4 3/4″| 120 mm
Collar length 26 3/16″| 665 mm
Item weight, lbs (kg) 132 (60)
Weight of the parts drilled out in the collar, lbs (kg) 33 (15)
Collar code MSC-146R1
Nominal diameter 5 3/4″| 146 mm
Cargo capacity 900 (700*)
Allowed collar differential pressure, PSI (atm), max:
in cementing 3380 (230)
in operation 8597 (585) | 6172 (420)*
OD collar 6 15/16″| 176 mm
ID collar 4 15/16″| 125 mm
Collar length 26 3/16″| 665 mm
Item weight, lbs (kg) 137 (62)
Weight of the parts drilled out in the collar, lbs (kg) 33 (15)
Collar code MSC-168R1
Nominal diameter 6 5/8″| 168 mm
Cargo capacity 1200 (935*)
Allowed collar differential pressure, PSI (atm), max:
in cementing 3086 (210)
in operation 7348 (500) | 5291 (360)*
OD collar 7 3/4″| 196 mm
ID collar 5 3/4″| 146 mm
Collar length 26 3/16″| 665 mm
Item weight, lbs (kg) 165 (75)
Weight of the parts drilled out in the collar, lbs (kg) 55 (25)
Collar code MSC-178R1
Nominal diameter 7″| 178 mm
Cargo capacity 1500 (1160*)
Allowed collar differential pressure, PSI (atm), max:
in cementing 3086 (210)
in operation 7054 (480) | 5144 (350)*
OD collar 8 1/4″| 210 mm
ID collar 6 1/8″| 156 mm
Collar length 26 3/16″| 665 mm
Item weight, lbs (kg) 176 (80)
Weight of the parts drilled out in the collar, lbs (kg) 77 (35)
Collar code MSC-194R1
Nominal diameter 7 5/8″| 194 mm
Cargo capacity 2000 (1150*)
Allowed collar differential pressure, PSI (atm), max:
in cementing 3086 (210)
in operation 6760 (460) | 4850 (330)*
OD collar 8 7/8″| 226 mm
ID collar 6 3/4″| 172 mm
Collar length 26 3/16″| 665 mm
Item weight, lbs (kg) 212 (96)
Weight of the parts drilled out in the collar, lbs (kg) 77 (35)
Collar code MSC-219R1
Nominal diameter 8 5/8″| 219 mm
Cargo capacity 2000 (1150*)
Allowed collar differential pressure, PSI (atm), max:
in cementing 2792 (190)
in operation 6319 (430) | 4554 (310)*
OD collar 10 1/8″| 257 mm
ID collar 7 5/8″| 195 mm
Collar length 26 3/16″| 665 mm
Item weight, lbs (kg) 229 (104)
Weight of the parts drilled out in the collar, lbs (kg) 95 (43)
Collar code MSC-245R1
Nominal diameter 9 5/8″| 245 mm
Cargo capacity 2000 (1150*)
Allowed collar differential pressure, PSI (atm), max:
in cementing 2792 (190)
in operation 5878 (400) | 4262 (290)*
OD collar 11 1/8″| 283 mm
ID collar 8 13/16″| 224 mm
Collar length 26 3/4″| 680 mm
Item weight, lbs (kg) 276 (125)
Weight of the parts drilled out in the collar, lbs (kg) 106 (48)

*The values in brackets in producing the body and the holder of steel 45 are agreed with the customer taking into account the specific cementing conditions..

A range of collar nominal diameters corresponds to a range of casing strings from 140 to 245 mm in diameter, as per GOST 632-80.

Maximum allowable operating temperature, K, is 373 K max.

The manometric pressure required for cutting off the screws of the lower and the top collar plugs (opening and closing the circulating openings) is 30-60 atm.