Pup joints

Pup joints are used for high-pressure well piping, hydraulic fracturing, test lines, cementing and circulation lines, as well as for other applications in servicing and stimulating well productivity.

Attributes	Nominal diameter, d, mm	D, mm	t, mm	l*, mm	Trapezoidal thread			Working pressure, MPa (Psi)	Weight, kg
					Thread CnTr	WECO
					Thread CnTr	ACME thread	Figure
TI-2" R1	50 (2")	75	12,5	1000	-	3-13/32" ACME 4 TPI -2G (86,52x6,35)	Fig. 206	14 (2000)	23
				2000					42,4
				4000					81
		75	12,5	1000	-	3-13/16" STUB ACME 3 TPI -2G (96,84х8,467)	Fig. 602	41 (6000)	23
				2000					42,4
				4000					81
		75	12,5	1000	-	4-1/8" ACME 3 TPI -2G (104,775х8,467)	Fig. 1502	70...105 (10000...15000)	23
				2000					42,4
				4000					81
		75	12,5	1000	CnTr 100х12,7	-	-	35...105 (5000...15000)	23
				2000					42,4
				4000					81
TI-3"R1	76 (3")	94	9	1000	-	4-13/16" ACME 4 TPI -2G (122,24х6,35)	Fig. 206	14 (2000)	29
				2000					47,4
				4000					85,4
		94	9	1000	-	5-3/8" STUB ACME 3 TPI -2G (136,525х8,467)	Fig. 602	41 (6000)	29
				2000					47,4
				4000					85,4
		100	12	1000	-	5-3/8" ACME 3-1/2 TPI -2G (136,525х7,257)	Fig. 1502	70...105 (10000...15000)	35
				2000					61,5
				4000					113,3
		100	12	1000	CnTr 136х12,7	-	-	35...105 (5000...15000)	35
				2000					61,5
				4000					113,3
TI-4" R1	100 (4")	122	10	1000	-	6-1/8" ACME 3 TPI - 2G (155,575х8,467)	Fig. 206	14 (2000)	37,4
				2000					65,1
				4000					120,4
		122	10	1000	-	6-1/4" STUB ACME 3 TPI -2G (158,75х8,467)	Fig. 602	41 (6000)	37,4
				2000					65,1
				4000					120,4
		124	12	1000	-	6-11/16" STUB ACME 3 TPI М1 -2G (169,86х8х467)	Fig. 1502	70...105 (10000...15000)	46,4
				2000					80,2
				4000					147,6
		124	12	1000	CnTr 160х12,7	-	-	35...105 (5000...15000)	46,4
				2000					80,2
				4000					147,6

l* - pipe length by agreement with the consumer, it is possible to manufacture lengths of multiples of 1 foot.
The remaining TI sizes are determined by the corresponding QRC.

TI-2"R1	50 (2")	3-13/32" ACME 4 TPI -2G (86,52x6,35)	Fig. 206	14 (2000)	75	12,5	1000	23	2000	42,4	4000	81	3-13/16" STUB ACME 3 TPI -2G (96,84х8,467)	Fig. 602	41 (6000)	75	12,5	1000	23	2000	42,4	4000	81	4-1/8" ACME 3 TPI -2G (104,775х8,467)	Fig. 1502	70...105 (10000...15000)	75	12,5	1000	23	2000	42,4	4000	81	CnTr 100х12,7	35...105 (5000...15000)	75	12,5	1000	23	2000	42,4	4000	81
TI-3"R1	76 (3")	4-13/16" ACME 4 TPI -2G (122,24х6,35)	Fig. 206	14 (2000)	94	9	1000	29	2000	47,4	4000	85,4	5-3/8" STUB ACME 3 TPI -2G (136,525х8,467)	Fig. 602	41 (6000)	94	9	1000	29	2000	47,4	4000	85,4	5-3/8" ACME 3-1/2 TPI -2G (136,525х7,257)	Fig. 1502	70...105 (10000...15000)	100	12	1000	35	2000	61,5	4000	113,3	CnTr 136х12,7	35...105 (5000...15000)	100	12	1000	35	2000	61,5	4000	113,3
TI-4"R1	100 (4")	6-1/8" ACME 3 TPI -2G (155,575х8,467)	Fig. 206	14 (2000)	122	10	1000	37,4	2000	65,1	4000	120,4	6-1/4" STUB ACME 3 TPI -2G (158,75х8,467)	Fig. 602	41 (6000)	122	10	1000	37,4	2000	65,1	4000	120,4	6-11/16" STUB ACME 3 TPI М1 -2G (169,86х8х467)	Fig. 1502	70...105 (10000...15000)	124	12	1000	46,4	2000	80,2	4000	147,6	CnTr 160х12,7	35...105 (5000...15000)	124	12	1000	46,4	2000	80,2	4000	147,6

l* - pipe length by agreement with the consumer, it is possible to manufacture lengths of multiples of 1 foot.
The remaining TI sizes are determined by the corresponding QRC.